High Voltage DC Switch Source for Solar
I need a high voltage DC rated switch for 3 series connected solar panels. The panel ratings are Voc 37.45V , Isc 8.7A, so I’ve been looking for a DC switch rated at 125V and 10A. If there is a simpl...
Forum Discussion
Here's a SSR rated to 480 volts DC at 40 amps (FET based)
http://www.mpja.com/40A-480VDC-Solid-State-Relay/productinfo/17289%20RL
Wire the control terminals to a 9v battery and a switch (for maximum isolation) or your 12v rv system.
Bolt it down inside a cast aluminum junction box for a heatsink and you're all set.
http://www.mpja.com/40A-480VDC-Solid-State-Relay/productinfo/17289%20RL
Wire the control terminals to a 9v battery and a switch (for maximum isolation) or your 12v rv system.
Bolt it down inside a cast aluminum junction box for a heatsink and you're all set.
