You could run a 3/16" rubber fuel hose from the Honda to your vehicles fuel tank , provided that your vehicle has a gasoline engine , nothing else is required , first time you start it you might have to pull the Hondas string about 8 times to get it primed and then after that it should start on the first pull.
My 3/16" fuel line runs thru the plastic Chevrolet fuel pump , I drilled a hole in the white plastic Chevy fuel pump and then just pressed the hose thru until about 8 inches of hose hangs down in the vehicles fuel tank .
Compression fit/ friction fit. , whatever you want to to call it.
Note: I drilled the hole thru the chevys fuel pump while the pump was removed from the vehicle.
Also added a inline fuel filter to that 3/16" hose