Honda EU3000is will not start
Starting a new post. Bought a used 3000is, was told it has been sitting for 1yrs. Things that I did to it: *Carb rebuilt *Fresh new gas *New spar plug *Fresh oil (FILL TO MAX & OVERFLOWED) ...
Forum Discussion
Here's a complete ignition system troubleshooting guide (no spark) for the Honda EU3000is.
Short version:
1. Test/check ignition switch, oil level switch, and coil. Replace as necessary.
2. Test/inspection ground lead. If broken on in wrong position, replace/reposition.
3. Inspect ICM (Ignition Control Module) for loose, dirty or poor connections.
4. If all above OK, replace ICM; test for spark.
-Robert@Honda
Caveat: I work for Honda, but the preceding is my opinion alone.
Short version:
1. Test/check ignition switch, oil level switch, and coil. Replace as necessary.
2. Test/inspection ground lead. If broken on in wrong position, replace/reposition.
3. Inspect ICM (Ignition Control Module) for loose, dirty or poor connections.
4. If all above OK, replace ICM; test for spark.
-Robert@Honda
Caveat: I work for Honda, but the preceding is my opinion alone.
