Honda EU3000is will not start
Starting a new post. Bought a used 3000is, was told it has been sitting for 1yrs. Things that I did to it: *Carb rebuilt *Fresh new gas *New spar plug *Fresh oil (FILL TO MAX & OVERFLOWED) ...
Forum Discussion
Robert-
Thank you!!! very much for the service manual. I did a bit more test before, I get to read your attached service tips.
I removed and install back the IC and I found that, my primary coil is 1.0ohm (now) and my seconday is 8.2Kohm (@tip of #1 link). BUT when I measure the 2ndary from at cap assembly insert, I get like 1.5Mohm (@#4 link).
Cap assembly by itself = open circuit = no ohm reading at all.
http://www.boats.net/parts/search/Honda/Generator/0/EU3000IS%20A-A%20GENERATOR,%20JPN,%20VIN%23%20EZGF-1080001/IGNITION%20COIL/parts.html
Thank you all for all the help, I will get the cap assemblya nd report back.
Thank you!!! very much for the service manual. I did a bit more test before, I get to read your attached service tips.
I removed and install back the IC and I found that, my primary coil is 1.0ohm (now) and my seconday is 8.2Kohm (@tip of #1 link). BUT when I measure the 2ndary from at cap assembly insert, I get like 1.5Mohm (@#4 link).
Cap assembly by itself = open circuit = no ohm reading at all.
http://www.boats.net/parts/search/Honda/Generator/0/EU3000IS%20A-A%20GENERATOR,%20JPN,%20VIN%23%20EZGF-1080001/IGNITION%20COIL/parts.html
Thank you all for all the help, I will get the cap assemblya nd report back.
