Forum Discussion
Thach2264
Sep 27, 2013Explorer
OK.. So without the elcetrical connected, gas or carb. I aseembly the pully back to the motor and confirmed that with 17.4Kohm on the secondary and 1.0 ohm on the primary.
I start pulling on the rope and check for spark, no spark. I remove the spark and measure the secondary again it is range from 200k to 1.5m ohm??? So I pull on the rope again to make it spin (slowly) and now it's back at 17.4Kohm. Put the spark plug back into the cap assembly and grounded the spark plug. Pulls the rope and no spark?
Does my electrical need to be put back together to get spark???
Robert- it's ok I just log out and I was able to see your attachement.
I start pulling on the rope and check for spark, no spark. I remove the spark and measure the secondary again it is range from 200k to 1.5m ohm??? So I pull on the rope again to make it spin (slowly) and now it's back at 17.4Kohm. Put the spark plug back into the cap assembly and grounded the spark plug. Pulls the rope and no spark?
Does my electrical need to be put back together to get spark???
Robert- it's ok I just log out and I was able to see your attachement.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,251 PostsLatest Activity: May 17, 2025