how hydraulic slide
How can I check to see if voltage to pump is enough m..slide is very slow..mcant find a bind, has fluid, can't find any leaks 1997 Winnebago vectra , Chevy workhorse Thanks in advance
Forum Discussion
J-d. Those three that you posted...yes...that's the ones..thanks...im not convinced that's my problem but the stud was loose and I believe had gotten hot.
Slide at one time went out good, then started coming in real slow like it was binding .. I cant find a binding point so started looking at wiring and found the stud where the hot 12 v cable attached to the White Rodgers solenoid had play and was not a good connection...hoping this is the issue but sceptical since the slide use to go out easy...
However...now I get no movement...will keep on trying and seeking yalls help..thanks
Slide at one time went out good, then started coming in real slow like it was binding .. I cant find a binding point so started looking at wiring and found the stud where the hot 12 v cable attached to the White Rodgers solenoid had play and was not a good connection...hoping this is the issue but sceptical since the slide use to go out easy...
However...now I get no movement...will keep on trying and seeking yalls help..thanks
