How much grease for wheel bearings?
I have run into this problem more then once over the years with boat and camping trailers. Over greasing zerk fitting on wheels and pushing grease through the seals and getting grease into brakes. ...
Forum Discussion
Mandalay Parr wrote:
Over greasing a bearing will make run hot.
Best to fill the bearing 1/3 full.
EZ Lube Hubs (and bearings) are packed completely full of grease and do not run hot, even in temps well over 100 degrees. Have run at 65-70 for hours in temps of 102-105 and hubs are warm to the touch.
