HWH Hydraulic Jack Issue
I have been traveling cross country for over a week with no issues. However today when I set up at the campground I lowered my jacks but didn't like the setup so I decided to retract them and start ov...
Forum Discussion
deanhes wrote:
Thanks for all the suggestions but my jacks are straight jacks with no air on the suspension. I traced every line and could find no pinched hoses. I took the top off the control module and manually depressed the individual tops of all the valves. No help. I guess I could break the hose unions in front of the valves and drain the fluid until the jack retracts. Any other suggestions.
What you do is what you posted. If no pinched hoses, then you crack open each individual jack line at the control valve. IF the jacks retract you need a new Joystick valve body. If they do NOT retract, then those 2 jacks need new inner seals and will have to be rebuilt. Before you crack open the lines, try to push a pry bar or such under the jacks and attempt to pry/lever them up. IF the jacks have bad inner seals, this will slowly bring them up. Then you know the 2 jacks have to be rebuilt. Doug
