Hydraulic questions
In trying to unwind the mess in my front compartment that houses the batteries and the hydraulic equip I need to disconnect some hydraulic lines so I can re route them to untangle the mess and protect...
Forum Discussion
Single hose system will not be fully pressurized, but will have some residual pressure
You should cap the lines as soon as it is disconnected
You want to minimize the amount of air getting into the system, keep the hose full of ATF FLUID and plug the jacks to prevent FLUID loss
You need to hitch up or otherwise support the 5vr and retract the jacks
Also give it a little time for the pressure to equalize , say 30 minutes
Any way, that's what I would do, before cracking those lines loose
You should cap the lines as soon as it is disconnected
You want to minimize the amount of air getting into the system, keep the hose full of ATF FLUID and plug the jacks to prevent FLUID loss
You need to hitch up or otherwise support the 5vr and retract the jacks
Also give it a little time for the pressure to equalize , say 30 minutes
Any way, that's what I would do, before cracking those lines loose
