I messed up removing an evap cooler
My plan was to remove the evap cooler and install a Fan-Tastic fan. As you can see from the pic I got carried away and accidently tore the aluminum roof on one side. I have putty tape and Dicor l...
Forum Discussion
Came out good.
I laid down a good bead of 3M 5200 fast cure and installed it.
Just to be sure I also used the 5200 around the plate edge.
I laid down a good bead of 3M 5200 fast cure and installed it.
Just to be sure I also used the 5200 around the plate edge.
