RoyB wrote:
Be sure your BLUE SEA switch can handle all of that current. I think their contacts is rated at 300AMPS - would have to look...
I always switch in POSITIVE side of things on the trailer... Each of my negative terminals goes to trailer frame ground so if I added a disconnect switch there I would also have to add some bus bars. I think the bus bars only come in four positions from BLUE SEA...Roy Ken
Yes, Switch is rated for enough Amps. Since this is for a battery bank and not part of the electrical polarity of my camper (I have 3 independent electrical systems in my camper.) I don't have it grounded to my frame, but we are moving away from the question, a cable that comes from a large battery bank, to an inverter.
