Installing a PD 9280 and have questions
Like most threads recently this one is electrical in nature. Here's a shot of my existing converter with what looks like a single 6 ga positive wire going out. The PD9280 has room for two positive wir...
Forum Discussion
This is what I did with my DUAL TERMINALs when installing my
PD9260C with my WF-8945 setup left in place.
The beauty here I can use either the WF8945 45AMP unit or the
PD9260C 60AMP unit but just flipping the circuit breaker for
each unit. A great backup plan-B idea. I only use one or the other...
The PD9260C in my case got relocated as close to the battery bank
main switch as I could get it and still be inside my trailer. I used
4AWG cables running from the WF8945 to one side of the DUAL CONNECTOR
of the DPD9260C. Then I continued on the battery bank with the other
side of the DUAL CONNECTOR.
This is floorplan diagram showing where the two converters are
installed in my trailer setup... I am currently using the three GP24
batteries verses what is shown in the diagram.
Worked out great for me...
Roy Ken
PD9260C with my WF-8945 setup left in place.
The beauty here I can use either the WF8945 45AMP unit or the
PD9260C 60AMP unit but just flipping the circuit breaker for
each unit. A great backup plan-B idea. I only use one or the other...
The PD9260C in my case got relocated as close to the battery bank
main switch as I could get it and still be inside my trailer. I used
4AWG cables running from the WF8945 to one side of the DUAL CONNECTOR
of the DPD9260C. Then I continued on the battery bank with the other
side of the DUAL CONNECTOR.
This is floorplan diagram showing where the two converters are
installed in my trailer setup... I am currently using the three GP24
batteries verses what is shown in the diagram.
Worked out great for me...
Roy Ken
