Inverter Bonding Neutral to Ground
Here's a picture of how a Kisae 2000W inverter's GFCI outlet is wired. The neutral side is not bonded to socket ground other than through a capacitor, as is the hot side. I guess the caps have som...
Forum Discussion
SCVJeff wrote:road-runner wrote:Thats sure what it looks like with the shape and the ground wire appearing to loop
A lot of 2-wire output inverters and generators have one of their conductors bonded to ground. While not all do it, it's a standard thing and I see no issue with it. The black blob could possibly be a ferrite bead to suppress electrical noise transmission between the chassis ground and inverter, but with no visibility under the shrink tubing it's only a guess.
Got a closer look. It's a metal cylinder with the green wire going through it, looping back and going through it again. Then the whole thing covered in black shrink wrap.
