Inverter Installed - Open Ground?
I finished installing my new Victron 250w 12v inverter. I hard-wired it with direct connections to + and - battery terminals using 9 feet of 8AWG wire. There is a connection point on the inverter for ...
Forum Discussion
I use a 600WATT AIMS PURE SINE WAVE Power Inverter feeding a couple of 120VAC Drop cords with multitap heads that is always ON.
Where it is tied to 12VDC the -12VDC connection is grounded to frame ground. i.e. the -12VDC lead feeding the 600WATT Power Inverter is at frame ground...
I never have had any issues.... Always have 120VAC at the two locations of the multi head extendion units that is plugged into the 600WATT AIMS Power Inverter...
google image
I also have never checked for open ground haha...
This is a drawing of my off-road floor plan..
Roy's image
Roy Ken
Where it is tied to 12VDC the -12VDC connection is grounded to frame ground. i.e. the -12VDC lead feeding the 600WATT Power Inverter is at frame ground...
I never have had any issues.... Always have 120VAC at the two locations of the multi head extendion units that is plugged into the 600WATT AIMS Power Inverter...
google image
I also have never checked for open ground haha...
This is a drawing of my off-road floor plan..
Roy's image
Roy Ken
