Large batteries under rig?
I have 4 of the 100+ lb AGM batteries that MrWizard has, and I want to place them under my new (used) van, on brackets attached to the frame. I can't afford the Tork Lift Hidden Power (cost is doub...
Forum Discussion
Hie thee to a welder. Take their advice. Tie down straps are a must. DAMHIK.
I'd use a 1/2 to 3/4 inch plywood floor in a "well" of angle iron to spread the weight over the entire side of the battery (I have the same as you and Mr W).
Do adjust the float voltage to what your particular iteration of the jars requires. Do use temperature compensation charging if it is available.
I'd use a 1/2 to 3/4 inch plywood floor in a "well" of angle iron to spread the weight over the entire side of the battery (I have the same as you and Mr W).
Do adjust the float voltage to what your particular iteration of the jars requires. Do use temperature compensation charging if it is available.
