Led lights
I just replaced my 12v lights with LED lights from Caming World. They started out with a blueish tint but now they are turning white. I'm not sure they are actually brighter than what came with the ...
Forum Discussion
LScamper wrote:
RV Buzz wrote:
"I checked the voltage at the socket while the genny's running and it's 15.5 volts."
Why do you have 15.5V at the socket, bad convertor? Way to high and may be doing damage to LEDs and other RV electronics!
I'm looking into that right now in my Magnetek info that came from the original owner. It's a 94 and no telling what's been going on. I had to take it into the shop for the genny and the shop said things were all screwed up with the governor linkage, carb and so on. I'm slowly undoing some of the engineering from the last owner and putting it right but it does take time. The convertor is supposed to be pretty much bulletproof(according to Magnetek) Given the output in excess of manufacturers spec of 14 volts I may need to replace that. I only use the lights on DC. No breakers are tripping so damage shouldn't be an issue, except to my LEDs.
