LFP battery absorption and float - report
Bought this 120AH LiFePO4 a while ago https://www.lynaclithium.com/wp-content/uploads/2022/03/12.8V-100Ah-True-Series-Quick-Sheet-USA.pdf. 120AH marketed as 100AH. Don't see this now but on the old...
Forum Discussion
Almot, I have a Victron 150/100 MPPT controller. I set bulk to 14.4 volts, absorption time to 25 minutes, float to 13.6 volts, tail current to 3 amps, and the re-bulk voltage offset to .20 volts.
When the switch from absorption to float is reached, I lose a couple amp hours during the transition. Which, of course, is no big deal since I have 1030 ah total capacity.
My SOK batteries state full charge to be 14.6 volts.
When the switch from absorption to float is reached, I lose a couple amp hours during the transition. Which, of course, is no big deal since I have 1030 ah total capacity.
My SOK batteries state full charge to be 14.6 volts.
