Lifepo4 float setting?
I have not had to deal with a float setting so far with PWM controllers but I have a Victron 75/15 coming tomorrow and reading up on the settings,it is confusing especially the float setting..Some say...
Forum Discussion
Hi PT, since you’re here, you probably have noticed my forced rebuke to your contemporary, BFL…FWIW, I trust this will not signal a re-booted SiO2 ‘good cop, bad cop’ Tag-team that shifts LFP dialogue to off-topic SiO2’s…
Either way, just know that I’m always open to sincere and honest battery discourse, and were I in either your’s or BLF’s shoes (say, above the 45th parallel at -30 to -40 d/f), I suspect that SiO2’s (due to their excellent cold weather attributes!) could be my choice as well :)…However (as I recall…), I had no luck at locating an independent White Paper on SiO2’s, so I’m kinda curious as to how their depth of ‘usable’ discharge compares with LFP’s?? - but for now I’m quite happy to defer, as this enquiry is a bit off topic….
3 tons
Either way, just know that I’m always open to sincere and honest battery discourse, and were I in either your’s or BLF’s shoes (say, above the 45th parallel at -30 to -40 d/f), I suspect that SiO2’s (due to their excellent cold weather attributes!) could be my choice as well :)…However (as I recall…), I had no luck at locating an independent White Paper on SiO2’s, so I’m kinda curious as to how their depth of ‘usable’ discharge compares with LFP’s?? - but for now I’m quite happy to defer, as this enquiry is a bit off topic….
3 tons
