Lippert - You can do better than this.
I was hearing some creaking and groaning coming out of the suspension of my two year old fifth wheel. So I dropped one of the springs and examined the bushing. I was really disappointed that Lippert...
Forum Discussion
How bad are those thin plastic bushings?? Pretty p*ss poor if you ask me.
For reasons I can't discuss, we had a previous brand new TT into a frame & axle shop within days of us picking it up at the dealer and it had a detailed inspection. One thing they said was every single plastic bushing was shot. The bushings only had just over 2K miles from Indiana to the west coast. How much more could it cost for Lippert's Never-fail bushings to be standard? There's no excuse for using the thin cheapo junk. You've got to know that there's a lot of TT and FWs out there with failed bushings.
As soon as we got our current TT, we installed the Dexter EZ-Flex equalizers, shackles and wet bolts. It came with Lippert's Trailair equalizers and regular thin shackles and plastic bushings.
With the wet bolts, there is a correct method for greasing them. One forum member here recommends cutting a figure-eight groove in the bolts with a dremel tool so that grease can get better distributed.
For reasons I can't discuss, we had a previous brand new TT into a frame & axle shop within days of us picking it up at the dealer and it had a detailed inspection. One thing they said was every single plastic bushing was shot. The bushings only had just over 2K miles from Indiana to the west coast. How much more could it cost for Lippert's Never-fail bushings to be standard? There's no excuse for using the thin cheapo junk. You've got to know that there's a lot of TT and FWs out there with failed bushings.
As soon as we got our current TT, we installed the Dexter EZ-Flex equalizers, shackles and wet bolts. It came with Lippert's Trailair equalizers and regular thin shackles and plastic bushings.
With the wet bolts, there is a correct method for greasing them. One forum member here recommends cutting a figure-eight groove in the bolts with a dremel tool so that grease can get better distributed.
