Lippert - You can do better than this.
I was hearing some creaking and groaning coming out of the suspension of my two year old fifth wheel. So I dropped one of the springs and examined the bushing. I was really disappointed that Lippert...
Forum Discussion
I just realized that I tossed one of the old equalizers in the trash without removing the old shackles from it. So I did a little dumpster diving and found that the gap on the old one matches the gap on the new one. Could this actually be Lippert's design specifications?
Then I craweled back under the RV and took a look at the assembled unit. The gap was not visible, but when I used a feeler gauge, there was certainly some slop between the hard surfaces.
I'll see what e-Trailer and Lippert have to say in the morning, but at least the new configuration appears to match the original Lippert configuration.
Then I craweled back under the RV and took a look at the assembled unit. The gap was not visible, but when I used a feeler gauge, there was certainly some slop between the hard surfaces.
I'll see what e-Trailer and Lippert have to say in the morning, but at least the new configuration appears to match the original Lippert configuration.
