Looking for a ground wire
I'm installing an external LED light strip under my awning. Man, these things are BRIGHT. I'm trying to install a dimmer controller but can't find a ground. The controller requires both 12V and ground...
Forum Discussion
2112 wrote:dougrainer wrote:Thanks Doug
Use this. For less than $30 and you control while outside. Doug
https://www.amazon.com/RV-LIGHTING-WS-01DC-Wireless-Controller/dp/B01LOIZ3Q2/ref=asc_df_B01LOIZ3Q2/?tag=hyprod-20&linkCode=df0&hvadid=366432791441&hvpos=&hvnetw=g&hvrand=8990743157653328673&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027230&hvtargid=pla-624344303487&psc=1&tag=&ref=&adgrpid=79954179047&hvpone=&hvptwo=&hvadid=366432791441&hvpos=&hvnetw=g&hvrand=8990743157653328673&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027230&hvtargid=pla-624344303487
But doesn't this still require a ground wire? It looks like it wires up just like the one I have
This is installed outside at the awning tube area where your 2 wires connect to the LED lights. Just 2 wires POS and NEG. You then turn the lights ON at your wall switch. Then control the ON/OFF and Dimmer with the hand held remote. IF you are running a NEW wire to the outside LED, just get your ground from the Awning Arm. Doug
