Forum Discussion
Thorshegoes
Jul 13, 2020Explorer
Ok, here's what I did today.
1. Tested for an open slot that received 12 volts from ACC.
2. Connected male spade to open slot.
3. Tested voltage at positive lead to control board. Read approx 12 volts.
4. Tested tube fuse. Fuse is good.
5. Removed and secured ribbon connectors. Ribbons are secured.
Still no power to control board in either ACC or with engine running.


1. Tested for an open slot that received 12 volts from ACC.
2. Connected male spade to open slot.
3. Tested voltage at positive lead to control board. Read approx 12 volts.
4. Tested tube fuse. Fuse is good.
5. Removed and secured ribbon connectors. Ribbons are secured.
Still no power to control board in either ACC or with engine running.


About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,256 PostsLatest Activity: May 22, 2025