Manufacturers saving a few cents on wire
Lately I have been looking into getting better battery recharge time performance. When I looked into the cabinet housing the converter charger I found something odd. There are 8 AWG wires about 1 ft l...
Forum Discussion
I have a 45 amp IOTA charger and I get about .4v drop between the converter/charger and the batteries (measured not from the chart). Also Jayco apparently also specified this charger minus the RJ45 socket to add the IOTA charge wizard. Yes I have looked for it multiple times over the years.
Unfortunately the trailer is in storage so I can't measure lengths. But it's a 27 foot box with the converter about 10 feet forward of the rear bumper. Which is how I estimate the 20 foot run one direction. I guess that would make it 40 feet out and back (Pos-Neg)
Unfortunately the trailer is in storage so I can't measure lengths. But it's a 27 foot box with the converter about 10 feet forward of the rear bumper. Which is how I estimate the 20 foot run one direction. I guess that would make it 40 feet out and back (Pos-Neg)
