Mean Well RSP-500-15 Switching Power Supply
IT just arrived. Initial impressions: Much heavier than the cheapowatt 1/2" wider, 1/2 inch longer and almost 1/2 inch less High than cheapowatt. The casing is about 50 to 75% thicker aluminum t...
Forum Discussion
Okay 2 hours into test.
Battery at 14.5v accepting 3.2 amps.
AH counter saying 2ah from full.
GT Power meter saying 14.65V and 9.8 amps passing through it.
Claiming 48.9 amp hours have passed through it since test began( loads still on charging battery)
13.17vMinimum
40.94 amp peak
721.5 Watt hours
591.2 Watt peak.
I gotsta get some fatter copper between MW and battery Switches, include more options for how current is read. Right now I need the load switch to be on the charging battery for the IPN pro remote to count amps into the battery.
MW Terminal voltage 14.71V has been at 14.71v since the 20 minute mark. Battery voltage lagged pretty far behind in the beginning. Still down ~.2v
Have plotted graph, but am done for the night.
I really like the GT power meter. It needs fatter copper leads. Probably gonna buy another one and make this one permanent on the MeanWell.
Battery at 14.5v accepting 3.2 amps.
AH counter saying 2ah from full.
GT Power meter saying 14.65V and 9.8 amps passing through it.
Claiming 48.9 amp hours have passed through it since test began( loads still on charging battery)
13.17vMinimum
40.94 amp peak
721.5 Watt hours
591.2 Watt peak.
I gotsta get some fatter copper between MW and battery Switches, include more options for how current is read. Right now I need the load switch to be on the charging battery for the IPN pro remote to count amps into the battery.
MW Terminal voltage 14.71V has been at 14.71v since the 20 minute mark. Battery voltage lagged pretty far behind in the beginning. Still down ~.2v
Have plotted graph, but am done for the night.
I really like the GT power meter. It needs fatter copper leads. Probably gonna buy another one and make this one permanent on the MeanWell.
