measuring shock
How do I measure a shock length for replacement. I have a leaking Rancho..it is on the heavily modified front end of my 99 E350 C, x4x'd 24ft'r. I can see some numbers on the cartridge but they don't ...
Forum Discussion
subcamper wrote:
Typically, you will need:
1) type of mount at each end of the shock (threaded shaft, round bushing, etc)
2) shock length at full compression
3) shock length at full extension
If you call Rancho, they may be able to figure it out without you needing to remove it for the measurements (for example, they may know which shock it is by visual construction details of the shock along with the diameter).
Steve
With the above information any NAPA store can fix you right up.
