9AM
Panel Amps 5.5
Output Amps 5.9, PowerMeter says 5.93 amps
Voltage 13.12
Mppt is working, is it at max conversion ? IDK
But doubling the numbers to 11 & 11.8 follows the "conversion efficiency" in Salvos post ( 10.0 & 10.7 )
10:30am
generator is on, converter is charging at 15.1 amps
solar input 5.8a BS output 7.0 amps voltage 14.64
total amps charge 22.1, voltstage at batteries 14.14 ,
just the slightest of bubbles now & then ( 20>30 seconds )
yeah we have out gassing ;)
getting my.morning bulk charge , so I can let the solar do the top off and hold the batteries up while powering the fridge during the day
I will keep a watch on the batteries
11:45am
generator OFF, NO CONVERTER charge , Solar only
panel amps 9.3
output amps 10.1
controller volts 14.64
voltage at batteries 13.81 no gassing observed