SoundGuy wrote:
brulaz wrote:
Yes, I was wondering if others are seeing the low voltage LUP(?) and hearing the squeal at 11.6V? It's essentially the battery voltage in my case as I recently upgraded to short 1/0 cable and heavy soldered lugs.
I'm still powering my CT 1000 watt inverter with a single G27 so it's not surprising it would alarm well below full load but earlier you mentioned you're running 400 AH of battery power so I'm curious as to what your battery bank consists of that it would so easily suffer voltage drop sufficient to cause the inverter to alarm? :@
It takes a while at 950W to get it down to 11.6V (4 gc2 batts)
But 11.6V seems too high for it to start complaining.
