MPPT and series solar panels
Is there any mechanism that would get series panels to operate at their optimum voltage? For example, if one panel has a Vmppt of 17 volts and one at 18 volts and they are connected in series, is ...
Forum Discussion
2oldman wrote:
I just went out and ran the MW for one minute on inverter.
The PV input voltage immediately dropped to 92v (from 115) @ 5.2a. After MW stopped, PV voltage stayed at 92 and stayed there...as the controller is now charging the batteries. I can see if the voltage rises as the batteries come back up.
Wow, I love this info' coming down the pike. The above is just what I was afraid of, using the controllar on my Electric scooter. I might just have to disconnect the controllar if I run the 24v batts down to the set point? That would look silly, the old man with that solar scooter, pushing it down the street. Hmm.
