My stupid Question of the day

I like the approach of having your brakes checked and serviced annually and while up on the hoist, having the bearings inspected and repacked at the same time. Well worth the $250 or so it costs for both together.

I'm on the side that thinks the grease-able axles aren't worth the hype.

RJsfishin didn't you start the name calling? Yes of course you did. You responding back just proves that you are Still a Jack ass. Like I said why are you continuing to post on the question you aren't providing any useful information. I do appreciate the others that have posted.

Gau 8 wrote:

RJsfishin wrote:
Why would these hubs require maintenance any oftener than a car or truck w/ tapered roller bearings ?
It is those lacking experience that should not be grabbing a grease gun just because they see a grease zerk. And once you do get the proper experience, you would never have anything else.
Disassembling and repacking bearings even once a year, shows ignorance, or to put it nicer, lack of experience.

What a jackass!

Oh yeah, like you really added helpful information.
Resorting to name calling only proves more ignorance on your part.
If you just had to post something, why didn't you answer the question?
Why didn't anyone answer the question ?
Every word in my post was the truth,......resorting to name calling doesn't change that !

rugermark2 wrote:
opnspaces, that's what I was thinking also. On my last few trailers they all had the ez lube, I was just comparing the differences and was really surprised to see the 6 month inspection. My last trailers I did them every year. It is to often but it is my time and money.

If your rig is under warranty, O.P., do the maintenance on time as recommended and carefully document that fact. How many times have we seen posts from folks that have had problems within warranty periods only to be denied coverage due to their "failure to have performed scheduled maintenance"?

It's a game, but as we all know, it's their game. So long as you have that warranty "umbrella" over your head, you have to play by their rules.

RJsfishin wrote:

Disassembling and repacking bearings even once a year, shows ignorance, or to put it nicer, lack of experience.

??? Your statement simply makes no sense.

opnspaces, that's what I was thinking also. On my last few trailers they all had the ez lube, I was just comparing the differences and was really surprised to see the 6 month inspection. My last trailers I did them every year. It is to often but it is my time and money.

I agree Gau 8. I expected someone like that to respond. I think some people just try to get a rise out of people. And they are always braver online.

OP, I would probably just do the 12 months routine. To be truthful though I only do mine every few years.

I found the Dexter axle FAQ's today and found a snippet about E-Z Lube and bearing inspections (I added the red for emphasis below). Dexter FAQ's

E-Z LUBE - What is the E-Z Lube option?

The E-Z Lube option was designed specifically for the marine application where the axles are constantly being immersed in water. This feature provides a convenient method for purging the water from the hub cavity without having to pull the hub every time. The hubs should be removed every 12 months or 12,000 miles to inspect the bearings and it is imperative to replace the seal at this time to assure that the grease does not leak out the back onto the brake linings rendering the brakes non-functional.

RJsfishin wrote:
Why would these hubs require maintenance any oftener than a car or truck w/ tapered roller bearings ?
It is those lacking experience that should not be grabbing a grease gun just because they see a grease zerk. And once you do get the proper experience, you would never have anything else.
Disassembling and repacking bearings even once a year, shows ignorance, or to put it nicer, lack of experience.

What a jackass!

RJsfishin I may have just joined this forum, and I may have just bought a new 5er this doesn't mean I'm new to trailers. I have owned 4 trailers and I have done all the maintenance myself. Before you insult people you should get a little history 1st.
Next thing I always go through my owners manuals before I do anything. The info for the axles was missing, so I asked where I could find it. To put it nicer next time don't respond you didn't provide information that was useful.