Need a permanent solution to my TV issues
2009 Itasca Cambria. Second owner. Short and sweet explanation of what I have. Single LNB off a Winegard dish running to Direct TV box. Output on DTV box is HDMI only. Front TV HDMI ready so not a pro...
Forum Discussion
Update:
Purchased a HDMI splitter that has one input and two outputs. It receives power from the transformer that came with it and also has a light on even with the 12volt unplugged. The TV's are working fine, front and back.
I now believe the splitter I originally purchased was defective. I wish I kept the box and receipt, it was pricey. So now things are moving along quite well BUT I lost the speakers on the left side of the surround sound
so the digging will proceed. My wife questions my patience, I actually enjoy the search for solutions. During this process i discovered one of the front mounts holding the front fairing on my Cambria came loose and
the other one had cracked adhesive. JB weld and gorilla epoxy and all is well I believe this will cure my 60 MPH squeak that annoyed the tar out of me.
Purchased a HDMI splitter that has one input and two outputs. It receives power from the transformer that came with it and also has a light on even with the 12volt unplugged. The TV's are working fine, front and back.
I now believe the splitter I originally purchased was defective. I wish I kept the box and receipt, it was pricey. So now things are moving along quite well BUT I lost the speakers on the left side of the surround sound
so the digging will proceed. My wife questions my patience, I actually enjoy the search for solutions. During this process i discovered one of the front mounts holding the front fairing on my Cambria came loose and
the other one had cracked adhesive. JB weld and gorilla epoxy and all is well I believe this will cure my 60 MPH squeak that annoyed the tar out of me.
