Need outside access cover for Norcold 876EG2

Well, turns out Winnebago still sells these. $70 later and I have one:



Steve

maillemaker wrote:
Great idea, Pirate!

Steve

Thanks. Mine is custom painted to match sidewall. I can't afford to lose it.

Great idea, Pirate!

Steve

PSA - get some small chain or cable and attach to inside of that cover and secure inside. If it comes loose, at least it will stay around. I think I used some zip ties to attach some small chain to mine.

Welp, in a moment of brilliance, I just decided to call Winnebago and see if they had one. $80 or so later I have one on the way.

Steve

When I lost mine I only could buy the entire part, frame and cover. It was the best way to do it and that way I knew it would fit and stay put. 10,000 miles later I still have it.

Yup, I think I'm going to have to pull the entire bezel , measure the cutout, and install a new bezel and door. I was hoping to be able to purchase the door by itself.

something like these? norcold refrigerator side vent cover

Nope. I've already tried generic searches like that. None of them look like mine specifically.

Was there something wrong with the link I posted? It was directly to your model.

Your link just goes to a generic page at TheNorcoldGuy for all makes and models. When you drill down ot the actual 876EG2/EG3 all they seem to sell are power boards.

Steve

maillemaker wrote:
Still looking for some links to this part if anyone is able to find it.

Steve

Was there something wrong with the link I posted? It was directly to your model.

.

something like these? norcold refrigerator side vent cover