Guy next-door came over and said, "OK let's do this." (Get the air conditioner on the roof.). He's about 6'4" and slim, but built like a lumberjack. Tied a rope around it, realized The wooden support had broken off, He was going to pull, I was going to push. We had a ladder in the back of the truck leaning on the nose of the rig. He was going to tie it up a new way, We decided we would remove the shroud. I went inside to get the power driver, came out, and he was halfway up the nose of my rig --one-arming it! All I did was scamper up and help him get the back end on the top. He laid it down on its side, then flat. Done!
Turns out I will need to bring wire from the junction box to the unit. There is an 18" long path/tunnel cut through the styrofoam leading to the 14" vent hole.
