New cooling unit or refurbish?
I need to make a decision shortly on which way to go for a Dometic cooling unit. If I send my unit in for repairs it will cost around $870 U.S. with a 5 year warranty. If I buy a new unit it w...
Forum Discussion
A new update with success!
I opened up the control rods again.
Used a multimeter and confirmed the Electric position.
Stood her up and plugged her in.
Not long after the pipe from the baffle started to
get hot !!!
Yippee!!
I didn't connect the elec/gas rod because:
a) it's a hassle.
b) it was stuck, needed lubrication and still wasn't moving well.
c) was now set to Electric.
d) I NEVER use the Gas setting.
Only one more thing that needs fixing but I'll leave it for later.
One foot is broken.
The screw on one foot is not going into its plate.
I need a new screw and plate.
:)
I opened up the control rods again.
Used a multimeter and confirmed the Electric position.
Stood her up and plugged her in.
Not long after the pipe from the baffle started to
get hot !!!
Yippee!!
I didn't connect the elec/gas rod because:
a) it's a hassle.
b) it was stuck, needed lubrication and still wasn't moving well.
c) was now set to Electric.
d) I NEVER use the Gas setting.
Only one more thing that needs fixing but I'll leave it for later.
One foot is broken.
The screw on one foot is not going into its plate.
I need a new screw and plate.
:)
