New Meter on order
wireless power meter Volts , Amps, KwHr, AmpHr, capacity, SOC, etc... sender and hall effect coil go at battery display goes where-ever (as long as in signal range) No pulling wires ...
Forum Discussion
K_and_I wrote:Thanks K_and_I , but I'm just talking about the display unit for USB power, but turns out since it's USB any 5 common 5 volt USB port will work I think. Thanks!
It's been some time since I installed mine, but, if I remember correctly, you can power the meter off of the board if they are close enough together to be practical. I bought a cheap 12v - 5v adapter off of Ebay and powered my meter from that. I don't remember using a separate 12v wire into the weatherproof box I used. I think the board used the power wire for voltage testing. Someone correct me if I'm wrong.
