New Thermostat Question
I have this furnace in my TC. There are only two connections to the thermostat, and they are labeled “Thermo” and “+Thermo” I’m installing a new thermostat, and it’s connected like ...
Forum Discussion
dougrainer wrote:
NO. RV Furnace fans CANNOT be operated by itself. Once the Furnace fan comes ON, then the ignition sequence happens. ALL the 2 wires do is transmit the 12 volts TO the furnace to start a Heat cycle. Nothing else. When you ask for heat, the wall tstat sends the 12 volts TO the furnace and then it operates until the Wall tstat is satisfied. Doug
Thanks Doug. I had a feeling that’s what the answer was going to be.
The new digital t-stat should do everything I need it to do, without the added complications of having to override the programmable functions that the RiteTemp stat wanted to default to.
I thought I needed a programmable t-stat and the two-speed fan control at one time, but discovered after using it for several years that I really didn’t.
It’s a nicer looking thermostat too.
:):)
