No 12VDC at batwing
Noticed that the batwing antenna was getting ZIP for stations. I climbed up on top of the rig & found NO 12vdc at the batwing. I don't have the Winegard power injector. The antenna "should" be getting...
Forum Discussion
Let me try again.....
No 12vdc at batwing.
I don't have the Wingard power injector (faceplate with button, green light)
Video Distribution box is supposed to supply the 12vdc out the "to Antenna"
Video Distribution box has 12vdc in back.
I can get an RF signal to the rear TV so I know some of the Video Distribution box is functional. Exercised the switches but no go.
So, looks like my options are,
New Video Distribution box at $99
Winegard powered faceplate at around $19
Or, something like this;
https://www.summitsource.com/Antennacraft-Antenna-PS10-Power-Inserter-Supply-15V-15-V-with-Diplexer-15-VDC-In-Line-Injector-Aerial-Amplifier-Coaxial-Cable-Video-Signal-100-mA-Class-2-Electrical-Transformer-PS10-Part-DV-12225S-P9252.aspx?gclid=Cj0KEQjw1ee_BRD3hK6x993YzeoBEiQA5RH_BI9H6rcsSrp0V4pS3rW2Y8TwEsxQBeT1hYRruaLE2DkaAiML8P8HAQ
Problem is, I'd like to get away from a wallwart and connect directly to my 12vdc supply. Not sure if running 12vdc into that power injector will work or not.
j-d
You night need to replace the "plate". I had one go bad on my prior rig.
Thanks all
No 12vdc at batwing.
I don't have the Wingard power injector (faceplate with button, green light)
Video Distribution box is supposed to supply the 12vdc out the "to Antenna"
Video Distribution box has 12vdc in back.
I can get an RF signal to the rear TV so I know some of the Video Distribution box is functional. Exercised the switches but no go.
So, looks like my options are,
New Video Distribution box at $99
Winegard powered faceplate at around $19
Or, something like this;
https://www.summitsource.com/Antennacraft-Antenna-PS10-Power-Inserter-Supply-15V-15-V-with-Diplexer-15-VDC-In-Line-Injector-Aerial-Amplifier-Coaxial-Cable-Video-Signal-100-mA-Class-2-Electrical-Transformer-PS10-Part-DV-12225S-P9252.aspx?gclid=Cj0KEQjw1ee_BRD3hK6x993YzeoBEiQA5RH_BI9H6rcsSrp0V4pS3rW2Y8TwEsxQBeT1hYRruaLE2DkaAiML8P8HAQ
Problem is, I'd like to get away from a wallwart and connect directly to my 12vdc supply. Not sure if running 12vdc into that power injector will work or not.
j-d
You night need to replace the "plate". I had one go bad on my prior rig.
Thanks all
