No power from new solar panel
I have existing solar wiring in my Casita running through a Renogy ViewStar controller. The controller is communicating with my battery. However, I'm not getting any input from my new 100W Renogy sola...
Forum Discussion
I see you had help. Did you read the instructions?
http://www.renogy.com/10A-20A-30A-PWM-Viewstar-Solar-Charge-Controller-Manual.pdf
Page 7 says panel connects to the left terminals. Battery to the center terminals. Right is load terminals and should have nothing.
Panel and battery shows positive to the right and negative to the left. Put your meter on to match the polarity and see if the meter reads normal or backward to verify polarity.
Page 20 shows a list of trouble shooting tips.
Post the results.
http://www.renogy.com/10A-20A-30A-PWM-Viewstar-Solar-Charge-Controller-Manual.pdf
Page 7 says panel connects to the left terminals. Battery to the center terminals. Right is load terminals and should have nothing.
Panel and battery shows positive to the right and negative to the left. Put your meter on to match the polarity and see if the meter reads normal or backward to verify polarity.
Page 20 shows a list of trouble shooting tips.
Post the results.
