No USB charge bricks needed while on shore power...
http://eshop.macsales.com/item/Newer%20Technology/PWR2USB/ Cool idea.... I have a few 12v ports added with dual charger jobbers. But this is cool. You can get 15a and 20a outlets too.
Forum Discussion
wkswenson wrote:
Clicky
Just be careful as these require a full depth electrical box and many RVs have shallow boxes. But great technology.
Many RV's have no box at all.. Mine only has a few of them and some of those I added. (Patio, Reefer, TV-interlock, Converter, Washer/Dryer I added one for the Sensar Pro and 3 20 amp outlets I added.
The rest the outlet is the box.. NOT a design I care for.
Question: HOW TO TELL THE DIFFERENCE.
On a regular box mounted outlet there will be one screw holding the cover on. in the center, you remove the cover and two screws one top center and one bottom center mount the outlet.
On the "All in one) the cover normally snaps on, You remove it and there are two screws, One in a "Top" corner and the other in the Bottom corner on the other side.
My opinion of those outlets is not high.
