dougrainer wrote:
elraie wrote:
dougrainer wrote:
Disconnect the 12 volt supply to the refer. Use a SEPARATE 12 volt supply. Either a regular car battery or a 12 volt battery from a electric power tool. Then see if the problem goes away. If so, report back. Doug
Thanks Doug. Will try when I get back to camp next weekend. What's the reasoning behind separate 12v - in case something wonky with the 12v coming off the converter? I had good voltage at the board, but I didn't check amperage.
AS Converters and Inverter/Chargers age, they sometimes send off RF to the 12 volt system causing electronics to malfunction. Refer and AC control boards are susceptible to this. You have replaced all parts except the optical board. BUT, the Main control is what controls 120/LP. Doug
Gotcha! And to be honest, my old WFCO I/C had a few odd glitches last season under load (unrelated to this fridge issue). Hopefully you're on to something here. Will post my results, thanks for your suggestion!