Norcold N611L Not Working
Ok guys - My cousin purchased a wanderer TT - not sure of the year, and yes, it has some issues. This one is a Norcold N611L. Because of his generation, he doesn't like to chat on the phone ...
Forum Discussion
opnspaces wrote:
Does the shaft of the screwdriver have to be grounded for the spark to jump?
No, the spark is "hot" enough to jump. Doug
Also, If you can "wiggle" the Piezo tower and it then works or stops, odds are the solder connections for the Piezo tower are loose and you can re-solder on the back of the Board and save the cost of a new board. The piezo tower would come loose from repeated removal of the Ignitor wire to remove the black cover and failure to use a back up to hold the Tower in place when removing the spade terminal. This type thing happens when you have to do a hard reset for a NO CO lock out.
