Forum Discussion

Dad2two's avatar
Dad2two
Explorer
May 29, 2015

Norcold N61X blinking it's my my fault code...

I have a Norcold N61X in a 27 ft Jayco BHS , 2004, which on getting ready this only blinks the code , light is now, flashes four times about every three seconds regardless of being on AC or gas. The message is the same. Yesterday, the burner sounded like it lit but no coldness occurred . Today provide me just the fault code above. Is there something I can replace? Thx!!

9 Replies

  • Dad2two wrote:
    Success! I followed the resetting protocol outlined in the service manual you all provided and my fridge started working again! In fact , later that day I had ice! Thx again all!


    That's interesting. The FAULT for a NO CO reset is 5 flashing, NOT 4 flashing. Doug
  • Success! I followed the resetting protocol outlined in the service manual you all provided and my fridge started working again! In fact , later that day I had ice! Thx again all!
  • Dad2two wrote:
    Thx Doug, is it the black plastic box? I tried to post a picture unsuccessfully . Thx


    Yes, the black plastic box on the outside rear of the refer. Doug
  • Thx Doug, is it the black plastic box? I tried to post a picture unsuccessfully . Thx
  • Dad2two wrote:
    Thanks for all the help everyone! I could not see any led light on the back. Now I can trouble shot and repair!


    No red Light because only the 1200 series has that. There is no need to troubleshoot. Replace the lower rear main module. Doug
  • Thanks for all the help everyone! I could not see any led light on the back. Now I can trouble shot and repair!
  • 4 times every 3 seconds is a fault in the refer controls. Not a serviceable repair in the field. You must take it to a Norcold Service center to find the problem. Yes, you can replace the only 2 items that affect this. The Lower control board and the Optical board. Doug

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,362 PostsLatest Activity: Mar 02, 2026