Forum Discussion

D_D_Wanderers's avatar
Oct 04, 2019

Norcold not cold

My Norcold refrigerator works good on LP. When switch to AC it dings and doesn’t work. Service guy checked control board and did a reset. Said all is good but wires look dry and could brake. Did not want to go any farther because can’t get parts till Monday. We are moving on Saturday. Any suggestions as to investigate further??
  • Reset of control board is ONLY needed if you get a 'No Co' error and 'lockout'
    Which means neither electric OR propane would work.
    (RV Tech would know that vs some repairman looking to justify his service call)



    What model is this Norcold.

    AC Mode requires 12VDC for controls
    AC Mode is 120VAC from a working outlet to control board via the power cord
    Then the 120VAC goes thru the GLASS Fuse (typically 5A but can be 8A if 2 elements are used)
    Then from Fuse `120VAC goes to the element (if 2 elements both have to work)

    SO which Model??

About Technical Issues

Having RV issues? Connect with others who have been in your shoes.24,191 PostsLatest Activity: Jan 19, 2025