We recently purchased a new Winnebago Vista 35F. We drove it to our warehouse in N. GA. It has been sitting there for approximately 30 days. We plugged it in to our 50 amp plug a couple days ago and now nothing works, either plugged in or by on board generator. No a/c, microwave, refrigerator, tv - nothing. We checked all the breakers, etc. and none were blown. What could be our problem?

50 amp plug where ? what voltage ?industrial 3 phase ?, dryer plug at home ?please clarifyif you plugged into a industrial "welder plug" in the warehoouseyou may have plugged into 3 phase 480v ?

Warehouse----50A plugOKAre the breakers for this plug ON? and you have 120V AC power at this plug?Hopefully you have a tester to check voltage?

Could be the transfer switch. You need some mode of testing and diagnosing to fix any issues. A handheld meter would verify where and how much power is available. Considering your rig is fairly new, the problem is usually an easy fix but we have no idea what it is at our keyboard. If you aren't conversant with electrical issues, I'd suggest you call a mobile RV tech to diagnose and fix your problem.

You fried everything by using a standard outlet versus an outlet for a RV. The are wired differently. I do not have the schematic but I bet someone will post it soon.

darsben wrote:You fried everything by using a standard outlet versus an outlet for a RV. The are wired differently. I do not have the schematic but I bet someone will post it soon.A 120/240 VAC 50 amp RV outlet is wired identically to a standard residential 120/240 VAC 50 amp range outlet. Nothing special...

Nothing works! | Good Sam Community

13 Replies

westend
Explorer
May 26, 2015
Could be the transfer switch.

You need some mode of testing and diagnosing to fix any issues. A handheld meter would verify where and how much power is available. Considering your rig is fairly new, the problem is usually an easy fix but we have no idea what it is at our keyboard.

If you aren't conversant with electrical issues, I'd suggest you call a mobile RV tech to diagnose and fix your problem.
Old-Biscuit
Explorer III
May 26, 2015
Warehouse----50A plug

OK
Are the breakers for this plug ON? and you have 120V AC power at this plug?

Hopefully you have a tester to check voltage?
MrWizard
Moderator
May 26, 2015
50 amp plug where ? what voltage ?

industrial 3 phase ?, dryer plug at home ?

please clarify

if you plugged into a industrial "welder plug" in the warehoouse
you may have plugged into 3 phase 480v ?

Forum Discussion

Nothing works!

13 Replies

About Technical Issues

Related Content

Nothing works..

Nothing works?

Nothing For Nothing

Storage and Work Space Near Portland

Fridge not working/freezer kind of working