Onan 6.5 nhe gen set
Been pondering my generator, which has not exactly been working correctly. I took off the air cleaner and was able to access the cover behind it that I think is the cover to the brushes. It is kind ...
Forum Discussion
Sorry, I was a bit anxious when I posted the above. I am troubleshooting my generator problem and am not doing a good job. I thought I had my generator problems over about a month ago, when I had a bad starter replaced. It ran both air conditioners and was running smooth and fine. We headed out for Colorado and about 100 miles down the line I felt the air conditioners were not running even though the generator was running smooth. I pulled over and neither air conditioner was running, there was no electricity, so I shut the generator down and went on. Arrived at destination, generator not needed, now in a few days it would be nice if it worked. Checking to see if the brushes were bound up seemed like a simple thing I might be able to check. Actually, I did work up the nerve to pull on those flimsy lookin' wires. They lifted up then snapped back. So, that is where I am at, just trying to check what I can until I get home and if needed I will take it to the cummins/onan dealership. Thanks for checkin'
