Onan microlite 2800 Gas Carburetors
I've recently purchased a 1988 RV with an Onan KV spec J 2.8 gasoline. I was able to get the generator running, but it runs rough, and surges very strongly. All research leads me to believe that the ...
Forum Discussion
westend's method x2
Back in the days of "Hell No We Won't Go" I was stuck rebuilding carburetors. I had a 5-gallon pail of extremely obnoxious smelling carburetor "dip" and a basket.
An overnight "dip" followed by an immersion in boiling hot rinse water did what it could. I had an "unapproved" full force rubber-tipped blow gun operating at 140 PSI.
Even with all that, I had some quadra-jets and later on, thermoquads who resisted to the last - took full force 140 psi air, then "ptuuii" something spit out of a passage or orifice.
I can only wonder at the efficacy of soaking something in mouse-milk.
Back in the days of "Hell No We Won't Go" I was stuck rebuilding carburetors. I had a 5-gallon pail of extremely obnoxious smelling carburetor "dip" and a basket.
An overnight "dip" followed by an immersion in boiling hot rinse water did what it could. I had an "unapproved" full force rubber-tipped blow gun operating at 140 PSI.
Even with all that, I had some quadra-jets and later on, thermoquads who resisted to the last - took full force 140 psi air, then "ptuuii" something spit out of a passage or orifice.
I can only wonder at the efficacy of soaking something in mouse-milk.
