Onan oil change now not running
Hey guys I have an Onan microquiet 4000. Generator ran fine. Did an oil change and cleaned air filter and hasn’t ran since. Cleaned the carb and still won’t run correctly. It fires and runs for about ...
Forum Discussion
Well when I was adjusting the screw I could hear the engine noise change. It got quieter so I’m gonna go ahead and jump off a limb here and say maybe it was over revving and going into a safety. Iv only had trailer for about 6 months. . When microwave would run it sounded the same as idle. No change. But now it runs like it should. Revs up when under a load. So I’m gonna gonna stick with the idle screw fixed my issue.
