Paralleling Power Supply Units Made Easy ???
I am considering paralleling a couple of 20a variable adjustable psu's for 40a charging. According to what I have read on the world wide inter-web, it can be done quite easily, provided the following ...
Forum Discussion
Thanks, Ken.
Yes, I'm trying to find a cc only unit on line, if only to look at its specs, and hopefully learn from them, but have not had any success. All the units are both cc and cv.
But in the case of charging a 6v or 12v battery, with the load continually changing, I'm not convinced even a cc only unit would hold the amps at say 5% of Bank Capacity without voltage going thru the roof. So V has to be limited, correct?
Yes, I'm trying to find a cc only unit on line, if only to look at its specs, and hopefully learn from them, but have not had any success. All the units are both cc and cv.
But in the case of charging a 6v or 12v battery, with the load continually changing, I'm not convinced even a cc only unit would hold the amps at say 5% of Bank Capacity without voltage going thru the roof. So V has to be limited, correct?
