PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
Was the battery really at 12.3 just as you plugged in? If you drove a bit home there may have been enough surface charge to prevent boost.
Otherwise load it down to 12.0 and try again.
Do you have a pendent? What happens when you push the button?
Otherwise load it down to 12.0 and try again.
Do you have a pendent? What happens when you push the button?
