PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
My PD9260C Converter seems to always start out at 14.4VDC then drops back to associated charge after it reads the battery status I guess...
Maybe all this happens because it is a C model ???
Roy Ken
Maybe all this happens because it is a C model ???
Roy Ken
