PD9260 Convertor Never Goes To 14.4V
If I am NOT on shore power, draw batteries down to 12.3 or 12.4 volts, I assumed that when I plugged back into shore power, my PD9260 would start putting out 14.4 volts, or at least something close. ...
Forum Discussion
Interesting.
When I plugged into shore power, I had my multimeter connected to the output of the PD9260. It read 13.6, briefly 13.7, then 13.6. Stayed at 13.6 for maybe 10 minutes, then I went into the house. Went out couple of hours later, still 13.6. Just went out again, still 13.6.
I just unplugged from shore power again, turned on some lights, and will start tomorrow, again, observe longer, and see if I can catch it at 14.4. Haven't been able to do that so far.
When I plugged into shore power, I had my multimeter connected to the output of the PD9260. It read 13.6, briefly 13.7, then 13.6. Stayed at 13.6 for maybe 10 minutes, then I went into the house. Went out couple of hours later, still 13.6. Just went out again, still 13.6.
I just unplugged from shore power again, turned on some lights, and will start tomorrow, again, observe longer, and see if I can catch it at 14.4. Haven't been able to do that so far.
